ADLINK ND-6067 - Manual (Page 170)

168
6.4.5 4mA Offset Calibration
@Description
Stores the current output value as 4 mA reference at the
specified analog output module.(only 6021)
@Syntax
$(Addr)0<CR>
$ Command leading code
(Addr) Address ID
0 Command Code
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid.
?
Command is invalid or no synchronized sampling
command was issued.
(Addr) Address ID.
@Example
User command: $060<CR>
Response: !06<CR>
To perform the 4 mA calibartion for analog output module at address
06H.
Note : Analog output module should be trimmed to the correct
value by “Trim Calibration” command before to execute
“4 mA Calibration”. Refers to Chapter 5 “Analog Output
Calibration” for details.
(6021)