ADLINK ND-6067 - Manual (Page 215)

213
6.7.18 Read Minimum Input Signal Width at High Level
@Description
Read the minimum input signal width at high level.
@Syntax
$(Addr)0H<CR>
$ Command leading code.
(Addr) Address ID (2-character)
0H Set minimum input signal width at high level
command code.
@Response
!(Addr)(MinFData)<CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(MinFData) The minimum width data at high level. The unit is
μs
and its resolution is 1
μs. This value range from 4 μs
to 1020
μs, which is a 4-digit integer.
@Example
User command: $300H<CR>
Response: !300100<CR>
Item Meaning Description
$ (Leading Code) Command leading code.
30 (Addr) Address ID is 30H.
0H Set minimum input signal width.
! Command is valid.
30 Address of counter/frequency module.
0100 Digital filter value of minimum signal width at high
level is 100
μs.
(6080)