Accessing the certifier’s menu – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 11
![background image](/manuals/738628/11/background.png)
Page 11 of 197
SECTION ONE –
Background Information
ACCESSING THE CERTIFIER’S MENU
Main Menu
To Choose, OK to
Select, MENU to Escape
1. UV Lamp Operation
2. UV Lamp Timer
3. UV Lamp Maintenance
For More Options
0%
100%
Filter Remaining 90%
Pressing the ‘MENU’ key
will cycle the display
between operation
and menu
Press the or keys
until Option # 6-
‘Calibration’ is
highlighted.
Press ‘OK’.
Cabinet Set up
1. Units of Measure
2. Security Lock
3. Display Options
4. Data Output Rate
5. Restore Defaults
6. Calibration
7. Diagnostic Test
For More Options
To Choose, OK to
Select, MENU to Escape
4. Light Operation
5. Light Timer
6. Light Maintenance
7. Blower Operation
8. Cabinet Set Up
Press the or keys until
Option 8 ‘Cabinet Set Up’ is
highlighted. Press ‘OK’.
The Logic will
now request
the password.
CERTIFIER USE ONLY
Enter Password:
The Password is:
‘Light’
‘UV Light’
‘Timer’
‘Timer’
‘OK’