Final inspection and test report form – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 31
Advertising
![background image](/manuals/738628/31/background.png)
Page 31 of 197
Final Inspection and Test Report Form
A copy of the Final Inspection Test Report is attached to the blower plenum cover,
beneath the front dress panel. The report contains initial setup information on inflow
and downflow velocities, and the initial blower torque setting. A copy of the report is
shown in Figure 1-7, below
Figure 1-7
Model/Serial Numbers
HEPA Filter Information
Test Results
Downflow Test Results
Advertising
This manual is related to the following products: