Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 29)

Page 29 of 197
SERIAL NUMBER TAGS
The model/serial number tag is located on the bottom outside edge of the right corner
post. A second tag is located on the front of the electronics module on the top of the
unit. This tag includes the unit’s operating voltage and amperage. The model and serial
numbers of each unit are also recorded on the unit test report attached beneath the
front dress panel. These items are shown graphically in the figures 1-3 to 1-5 below:
Figure 1-3
Primary Serial Tag
Figure 1-4
Secondary Serial Tag
Figure 1-5
Final Inspection and Test Report Form
Obviously, you can get confirmation of the Biosafety Cabinet's model by contacting
Labconco's Product Service Department, and providing us with the serial number. From
this number, we can tell the date of production and its model.