Labconco PURICARE Procedure Station Models 34812xx User Manual

Page 136

Advertising

background image

Page 136 of 197

8. To reinstall the diffuser, ensure that the two holes on the back edge of the

diffuser align with the diffuser support pins on the rear wall of the work area, as
shown in Figure 8-22.

Figure 7-22

Diffuser pins engaging the holes in the
rear of the diffuser.

Advertising

This manual is related to the following products:

PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx