Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 55)

Page 55 of 197
User Selectable Features
The Purifier Logic Series Biosafety Cabinet offers the user unparalleled flexibility and
convenience. The operation of the blower, fluorescent and UV lights can either be
operated manually, or you may choose to use the Smart-Start
™ or Night-Smart ™ features
that activate functions automatically when the sash is opened or closed.
The UV lamp can be programmed to operate for a given time interval when the sash is
closed, before it shuts off.
NOTE: During the first fifteen seconds of operation, the Cabinet performs an
auto-diagnostic routine to check the operation of the microprocessor. You
cannot access the menu during this time.
NOTE: When you are in the menu mode, if a selection is not made within 30
seconds, the display will reset back to display mode.
NOTE: Pressing the appropriate touchpad button will override Smart-Start
TM
or Night-Smart TM selections.
To access the menu, press the “MENU” button. The display panel will show
the first level menu. To select from the various menu options press the “▲”
or “▼” buttons until the selected option is displayed. Press “OK” to accept
that option, or press “MENU” to return to the previous menu level.
For further explanation of the menu and its options, please refer to figure 4-5.
Timer Operation
NOTE: The timer button allows activation of an interval (countdown) or
stopwatch (elapsed) timer. The timers cannot be operated simultaneously.
To access the main timer menu, press the “Timer” button anytime during normal
operation. The main timer menu is shown on the LCD display. Use the “▲” and “▼”
buttons to highlight the Interval or Stopwatch Timer. Press the “OK” button to select the
highlighted timer function.