Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 58)

Page 58 of 197
Light Operation
This menu option allows you to select whether the fluorescent lights will turn on
automatically every time the sash is opened.
NOTE: The fluorescent lights will automatically turn off when the sash is
closed, no matter what its setting is.
Smart-Start
When the “Smart-Start” option is selected, the fluorescent lights will turn on
every time the sash is opened.
Manual
When the “manual touchpad” option is selected, the fluorescent lights must be
turned on and off at the touchpad.
Light Timer
The fluorescent Lamp timer allows you to decide whether the fluorescent lamps will
operate continuously or for a limited time period that you select. This may be desired
for energy-savings as well as a safeguard for light-sensitive materials or animals.
Interval
When the “interval” option is selected, the Light Interval Timer menu is displayed.
Light Interval Timer
This window lets you set the amount of time for the fluorescent lamps to stay
lit once activated. Use the “▲” and “▼” buttons to select the amount of time,
and then press the “OK” button to set the interval.
NOTE: Closing the sash will reset the timer to its original setting.
Pressing “Light” will turn the lights off, pressing “Mute/OK“will
pause the timer.
Continuous
In the continuous mode, the fluorescent lights will remain lit until the “light”
button is pressed, or the sash is closed.
Light Maintenance
This selection allows you to check how many hours the fluorescent lamps have burned.
It also allows you to set the number of hours before replacement and to reset the light
hourmeter.