Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 110
Advertising
![background image](/manuals/738628/110/background.png)
Page 110 of 197
Figure 7-14
Figure 7-15
5. Remove the last two screws. Gently rock the cover, slide it to the left or right, and
swing it out and away from the unit.
NOTE: During disassembly, the blower plenum cover can rest on the center sash
support, as shown in Figure 7-16, to allow repositioning of the panel or your grip on it.
Figure 7-16
Center Sash Support
Advertising
This manual is related to the following products: