Labconco PURICARE Procedure Station Models 34812xx - Manual (Page 178)

Page 178 of 197
4. Install the replacement brackets that were included with the postfilter
accessory kit.
5. Install the postfilter pan between the exhaust filter brackets. Line up the
holes in the postfilter pan with the screw holes in the brackets.
6. Install the four screws, washers and nuts supplied with the kit as shown,
and tighten them securely to the exhaust filter brackets.
7. Install a new postfilter, making sure the airflow direction arrows point
upward. Reinstall the exhaust filter cover.