Menu options, Interval timer operation, Stopwatch timer operation – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 56: Uv lamp operation
Page 56 of 197
Interval Timer Operation
1. When selected, the Interval Timer menu is displayed on the LCD. The timer
defaults to 0:00:00.
2. Press and hold the “▲” or “▼” buttons to increase or decrease the timer
interval.
3. When the proper interval is entered on the display, press the “OK” button to
start the timer.
4. When the timer reaches 0:00:00, an audible alarm will sound, and the timer will
reset itself and repeat the countdown.
5. Press the “OK” button to pause the timer.
6. Press the “Menu” button to clear the interval timer and return to the main timer
menu.
Stopwatch Timer Operation
1. When selected, the Stopwatch Timer menu is displayed on the LCD. The timer
defaults to 0:00:00.
2. Press the “OK” button to start the timer.
3. Press the “OK” button again to zero the timer.
4. Press the “Menu” button to clear the stopwatch timer and return to the main
timer menu.
Menu Options
UV Lamp Operation
This menu option allows you to select whether the UV light will turn on automatically
every time the sash is completely closed.
Smart-Start
When the “Smart-Start” option is selected, the UV light will turn on every time
the sash is closed.
Manual
When the “manual touchpad” option is selected, the UV light must be turned on
and off at the touchpad.