Altera JNEye - Manual (Page 110)

The Channel List Panel contains the following command buttons:
• Add Channel—Open a file browser and locate the required channel model files.
• Delete—Delete a channel or test point.
• Duplicate—Duplicate the selected channel component or test point in the channel list.
• Disable—Disable the selected channel component or test point.
• Enable—Enable the selected channel component or test point.
• Clear—Delete all channel components and test points.
• Load—Load channel list and channel viewer configuration.
• Save—Save current channel list and channel viewer configuration.
• Save as—Save current channel list and channel viewer configuration in a new configuration file .
• Move Up (/\)—Move the selected channel component or test point up toward the transmitter side.
• Move Down (\/)—Move the selected channel component or test point down toward the receiver side.
Plot Option Panel
The Plot Option panel has the following sub-panels:
• S-parameter mode panel
• Plot configuration panel
2-104 Plot Option Panel
UG-1146
2015.05.04
Altera Corporation Functional Description
Send Feedback