Altera JNEye User Manual
Page 158
• Simulation Mode: Hybrid
• Output Options: Data Viewer with Image Output. This option tells JNEye to generate image files
(.png) for all output plots.
• Jitter Analysis Options: Jitter Component. This selection enables the jitter analysis function during
the link simulation.
Click Reference Clock Option.
Figure 3-6: Reference Clock Configuration
• Turn off the Ideal Reference Clock option
• Click the Option 2: Phase Noise tab
• Turn on the Select TX Reference Clock Option 2 option
• Type or copy the phase noise and spur data in the text boxes as shown in the above figure. The
reference clock phase noise data can be found in the example configuration file Demo.jne.
UG-1146
2015.05.04
Setting Up the Control Module
3-7
Tutorial: PCI Express 8GT
Altera Corporation