Altera JNEye User Manual
Page 184
Perform the following steps to add a victim channel:
1. Click Channel in the Link Designer and select Transmission.
2. Use the file browser to locate the channel model file VSR_Thru.s4p and add it to the channel list as
victim.
3. The JNEye Channel Wizard displays the S
dd21
characteristics. JNEye automatically detected the port
configuration of this S-parameter (Type 2 in this case).
4. Click OK to close the Channel Wizard.
5. Place the channel icon in the Link Designer.
Figure 4-6: Configure Victim Channel with JNEye Channel Wizard
Perform the following steps to add the first crosstalk channel:
1. Click Channel in the Link Designer panel and select Far-end Crosstalk (FEXT).
2. Use the file browser to locate the channel model file VSR_XTLK1.s4p and add it to the channel list as
FEXT.
UG-1146
2015.05.04
Constructing the Channel
4-7
Tutorial: 28 Gbps OIF VSR Link with Arria 10 GT
Altera Corporation