Altera JNEye - Manual (Page 35)

Name Description Unit Support
in JNEye
Comments
Jitter PDF Jitter
Probability
Density
Function
(PDF)
Jitter
amplitude,
Probability
(Jitter
amplitude can
be in absolute
time or UI
(unit interval)
unit)
Yes Jitter PDF defines the jitter probability density
function. The input format is jitter amplitude in
second and probability. The following is a jitter PDF
example:
-5e-12 1e-10
-4e-12 3e-7
-3e-12 1e-4
-2e-12 1e-2
-1e-12 0.29
0 0.4
1e-12 0.29
2e-12 1e-2
3e-12 1e-4
4e-12 3e-7
5e-12 1e-10
Noise
PDF
Noise
Probability
Density
Function
Noise
amplitude,
Probability
Yes Noise PDF defines the noise probability density
function. The input format is Noise amplitude in
volt and probability. The following is a noise PDF
example:
-50e-3 1e-10
-40e-3 3e-7
-30e-3 1e-4
-20e-3 1e-2
-10e-3 0.29
0 0.4
10e-3 0.29
20e-3 1e-2
30e-3 1e-4
40e-3 3e-7
50e-3 1e-10
Click Jitter/Noise Options to further configure each jitter and noise type. There are two jitter/noise
modes for JNEye’s transmitters: Jitter/Noise Component mode and DJ/RJ-DN/RJ mode. Only one jitter/
noise mode is active at a time and you must determine which mode to use in your simulations.
UG-1146
2015.05.04
Jitter/Noise Component 2-29
Functional Description Altera Corporation
Send Feedback