Altera JNEye User Manual
Page 49
JNEye provides the following settings and configurations for receivers:
Receiver
The following receiver types are supported:
• Stratix V GX
• Arria V GZ
• Stratix V GT
• Arria 10 GX/SX
• Arria 10 GT
• IBIS-AMI
• Custom
• PCI Express 8GT
Parameters or selections within the receiver setting are specific to the receiver type. For example, package
model, available CDR (Clock and Data Recovery) type and bandwidth, available CTLE (Continuous Time
Linear Equalizer) selections, DFE operation mode and settings, and additional receiver options, are set
and shown when a new device is selected. When a new receiver is chosen, it is automatically inserted into
the Link Designer, ready for connecting to other link components.
Package
Select the package type for a receiver device. For Altera products and PCI-Express 8GT receivers, the
package models are included in the receiver models. For Custom devices, you can specify package models
in the channel setting by inserting a “Package” channel component. When you select the Custom package
type (for any transmitter devices), the embedded package mode (if available) will be disabled and you can
add a channel component (such as an S-parameter) with type Package in the Link Designer workspace.
The Custom package model must be placed adjacent to the receiver module so it can be simulated and
analyzed correctly. If you choose the Custom package type but do not add a channel component with
Package type to the Link Designer workspace, the receiver is simulated without any package model.
UG-1146
2015.05.04
Receiver Setting
2-43
Functional Description
Altera Corporation