Altera JNEye User Manual
Page 116
Advertising
![background image](/files/763732/content/doc116.png)
Figure 2-89: Combined Channel Response Example
The JNEye Channel Viewer can also plot channel responses in a time-domain. It can compute the impulse
response (IR) and single-bit response (SBR) of a channel or a combined response of channels. When
performing a time-domain plot, you must specify the maximum frequency and plot length of the time-
domain response. The following figure shows examples of impulse response and single-bit response of a
5” microstrip PCB trace.
2-110
Plot Configuration Panel
UG-1146
2015.05.04
Altera Corporation
Functional Description
Advertising