Altera JNEye User Manual
Page 117
Advertising
Figure 2-90: Impulse Response and Single-Bit Response Examples
Combined time-domain channel responses can also be done in the JNEye Channel Viewer. The following
figure shows examples of combined time-domain channel response of a lossy backplane channel and a 5”
microstrip PCB trace.
Figure 2-91: Combined Time-Domain Channel Responses
By turning on the Remove Propogation Delay option, the JNEye Channel Viewer can mathematically
remove the delay of channels so that more direct comparison among channels can be seen. The following
figure shows an example of “Remove Propogation Delay” channel response of the same channels used in
the previous figure.
UG-1146
2015.05.04
Plot Configuration Panel
2-111
Functional Description
Altera Corporation
Advertising