Altera JNEye User Manual
Page 23
![background image](/files/763732/content/doc023.png)
Figure 2-12: Diamond-Shaped Eye Diagram Mask Editor
A custom eye diagram mask can be saved and loaded for future use.
Project Name
A user-defined name for the current task/project. Currently, the session name is the saved user configura‐
tion file name when the simulation configuration is saved.
Notes:
• The simulation results are automatically written to a directory with the same project name.
• The location of the output directory can be configured as a) the same location as the project configura‐
tion file (.jne/.jneschm) (this is the default), or b) a location you specify in the System Options. Refer to
the System Options section for details.
Simulation Mode
JNEye provides three simulation modes (statistical, full waveform, and hybrid) to meet your simulation
and link analysis preferences and needs. Hybrid mode is the default.
UG-1146
2015.05.04
Link and Simulation Setting
2-17
Functional Description
Altera Corporation