Receiver setting, Receiver setting -42 – Altera JNEye User Manual
Page 48
![background image](/files/763732/content/doc048.png)
Figure 2-31: Transmitter IBIS-AMI Model Status Tab
Consider the following for the IBIS-AMI transmitter modeling support in JNEye:
• JNEye only supports the IBIS model with an AMI component. An IBIS model without an AMI
component will not be simulated.
• Transmitter PLL is not supported when the IBIS-AMI transmitter is selected.
• JNEye supports IBIS-AMI transmitter models with the on-die S-parameter model using the txic IBIS-
AMI keyword. When JNEye detects the txic keyword, the Channel Wizard helps you determine the
on-die S-parameter configuration.
Related Information
Receiver Setting
A receiver receives waveforms from the channel and processes the waveforms through the receiver
equalizer and clock and data recovery module.
Figure 2-32: JNEye Receiver Settings
2-42
Receiver Setting
UG-1146
2015.05.04
Altera Corporation
Functional Description