Altera JNEye - Manual (Page 78)

Figure 2-55: Example of Batch Channel Selections
3. When channel selection is complete, click Generate Simulation Configuration to generate JNEye
simulation configuration files with the selected channels.
Note: In the current implementation of JNEye, all of the simulation configuration files generated from
step 3 will be saved in JNEye installation directory.
After completing these steps, a series of JNEye simulation configuration files are generated. For example,
by using the Date-Time header option, four sets of JNEye simulation configuration files are generated.
Figure 2-56: Batch Generated JNEye Simulation Configuration Files
2-72 Batch Channel Simulation Configuration
UG-1146
2015.05.04
Altera Corporation Functional Description
Send Feedback