Setting up the control module, Setting up the control module -4 – Altera JNEye User Manual
Page 181
Advertising
![background image](/files/763732/content/doc181.png)
Setting Up the Control Module
Link and Simulation Tab
Figure 4-3: Link and Simulation Settings
Set the following parameters in the Link and Simulation Settings tab:
• Data Rate: 28 (Gbps)
• Simulation Length: 65536 (Bits)
• Target BER: 10^ -15
• Test Pattern: PRBS-31
• Reference Clock: 700 (MHz)
• Link Optimization Method: CTLE => FIR => DFE
• FOM of Link Optimization: Area
• Compliance Mask: Off
• Simulation Mode: Hybrid
• Output Options: Data Viewer with Image Output
4-4
Setting Up the Control Module
UG-1146
2015.05.04
Altera Corporation
Tutorial: 28 Gbps OIF VSR Link with Arria 10 GT
Advertising