Setup and initialization, Setup and initialization -3 – Altera JNEye User Manual

Page 180

Advertising
background image

Figure 4-2: OIF VSR Channel Characteristics

The JNEye Channel Viewer shows that the channel has approximately 7.4 dB loss at 14 GHz. The four

crosstalk channels have an amplitude of about –45 dB at 14 GHz.
Use the ideal transmitter reference clock to simulate a more ideal case. The PLL in the Arria 10 GT

transmitter is enabled using ATX (LC) with low bandwidth configuration.
Use the JNEye’s link optimization algorithm to find optimal equalization settings for both the transmitter

and receiver. This demonstration uses the FIR => CTLE => DFE link optimization method.

Setup and Initialization

First, start JNEye. Input the following settings in the control module.

UG-1146

2015.05.04

Setup and Initialization

4-3

Tutorial: 28 Gbps OIF VSR Link with Arria 10 GT

Altera Corporation

Send Feedback

Advertising