Yaskawa P7 Drive User Manual - Manual (Page 64)

Digital Operator 3 - 6
Drive Main Menu
The Drive’s parameters and monitoring functions are organized into menu groups that make it easier to read and set
parameters. The Drive is equipped with five menu selections. The five selections and their primary functions are shown in
Table 3.7 and are directly available by pressing the menu key.
Table 3.7 Drive Main Menu
Main Menu Primary Function(s)
Operation
- DRIVE -
The Drive can be run in this menu.
Use this menu for monitoring values such as frequency reference or output current, displaying fault his-
tory or displaying the fault traces.
Quick Setting
- QUICK -
The Drive can be programmed in this menu.
Use this menu to set/read the most commonly used parameters.
Programming
- ADV -
The Drive can be programmed in this menu.
Use this menu to set/read every parameter.
Modified Constants
- VERIFY -
The Drive can be programmed in this menu.
Use this menu to set/read the parameters that have been modified from their factory default settings.
Auto-Tuning
- A.TUNE -
The Drive can be programmed in this menu.
Use this menu to auto-tune the Drive in order to optimize motor control as well as utilize the bi-directional
speed search feature.