Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Page 125
125
2.
Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note:
If the
Light Source Calibration
setting is set to
Run Periodically
in the projector's
Management menu, light source calibration starts automatically if you turn off the projector and the
following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3.
Turn off the power using the power switch on the side of the projector.
The On/Standby light turns off.
4.
To transport or store the projector, make sure the Status light is off, then unplug the power cord. (If
necessary, flip open the power cable holder first.)
Note:
If you use the projector continuously for more than 24 hours, or regularly turn it off by shutting off
the power outlet, schedule periodic
Light Source Calibration
events in the Extended menu schedule
settings.
Parent topic:
Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Related tasks