Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) - Manual (Page 177)

177
If you do not see this menu, hold down the Freeze button on the remote control for about 5 seconds or
until the menu appears.
• To prevent unauthorized use of the projector, select Power On Protection , press Enter , select On ,
press Enter again, and press Esc .
• To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protection , press Enter , select On , press Enter again, and press Esc .
• To prevent changes to network settings, select Network Protection , press Enter , select On , press
Enter again, and press Esc .
• To prevent changes to the projector's time or schedule settings, select Schedule Protection , press
Enter , select On , press Enter again, and press Esc .
• To prevent changes to the projector's Remote Camera Access settings in the Network menu, select
Remote Camera Access , press Enter , select On , press Enter again, and press Esc .
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Password Security Types
Entering a Password to Use the Projector
If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Press and hold down the Num button on the remote control while you enter the password using the
numeric buttons.
Note: The default password is 0000 .