Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) - Manual (Page 294)

294
On/Standby
(power) light Status
light Laser
light Temp light Filter
light Status and solution
Flashing blue Off Off Off Off Preparing network monitoring. (Wait
for the light to remain orange before
unplugging the projector.)
Blue Blue Flashing
blue Off Off The shutter feature is enabled.
Varies Flashing
blue Flashing
orange Varies Varies Refresh mode is enabled
Off Flashing
blue Flashing
orange Off Off Internal error. Turn off the projector,
unplug the power cord, and contact
Epson for help.
Off Flashing
blue Off Flashing
orange Off A fan or sensor has a problem. Turn
off the projector, unplug the power
cord, and contact Epson for help.
Off Flashing
blue Off Orange Off Projector is too hot.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental
temperature is not too hot.
• If operating the projector at high
altitude, turn on High Altitude
Mode .
• If the problem persists, unplug the
projector and contact Epson for
help.
Off Flashing
blue Orange Off Off The laser has a problem. Turn off the
projector, unplug the power cord, and
contact Epson for help.