Stopping video action temporarily – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Page 173
173
1.
Press the
Shutter
button on the projector's control panel or remote control to temporarily stop
projection.
2.
To turn the picture back on, press the
Shutter
button again.
Note:
To fade the image in and out when you press the
Shutter
button, turn on the
Fade-out
and
Fade-
in
settings in the Extended menu. If you selected
Shutter
as the
Shutter Release
setting in the
Extended menu, you can still control the projector while the shutter feature is active.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on
the screen. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.