Connecting to a wired network, Selecting wired network settings – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Page 73
Advertising
![background image](/files/868837/content/doc073.png)
73
Related references
Additional Projector Software and Manuals
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or higher.
1.
Connect one end of the network cable to your network hub, switch, or router.
2.
Connect the other end of the cable to the projector's
LAN
port.
Parent topic:
Selecting Wired Network Settings
Before you can project from computers on your network, you must select the network settings for the
projector using its menu system.
Note:
Make sure you already connected the projector to your wired network using the
LAN
port.
1.
Turn on the projector.
2.
Press the
Menu
button.
Advertising