Configuring tiling manually – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual
Page 208
Advertising
208
When setup is complete, you see a screen like this:
Note:
If any of the images are not positioned correctly, set up tiling manually instead.
12. Select the input signal to display an image.
After performing the steps here, adjust the images for any gaps and differences in color.
Note:
Do not change any of the projector names or IP addresses, or the images will not be adjusted
automatically.
Parent topic:
Related tasks
Configuring Tiling Manually
You can project the same image from multiple projectors to create one large image. If your projectors are
not on a network or you were unsuccessful tiling the images automatically, you can configure tiling
manually.
1.
Turn on the projector.
2.
Press the
Menu
button.
Advertising