Correcting image shape with point correction – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual

Page 151

Advertising
background image

151

Correcting Image Shape with Point Correction

You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
This is useful for adjusting overlapping areas in multiple projected images that do not line up correctly.

Note:

You can move the points on the grid between 0.5 to 600 pixels in any direction. Coordinates for

pixels that extend beyond the edge of the projected screen are displayed as negative numbers.

1.

Turn on the projector and display an image.

2.

Press the

Geometry

button on the projector control panel or remote control.

3.

Select the

Point Correction

setting and press

Enter

.

Note:

If you see a confirmation message, press

Enter

.

4.

Select the

Point Correction

setting again and press

Enter

.

You see this screen:

5.

Select the following settings:

• To set the number of vertical or horizontal grid lines, select the

Points (Vert.)

or

Points (Horiz.)

setting and select a value.

Advertising
See also other documents in the category Epson Projectors: