Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) - Manual (Page 168)

168
• Lights-Out Control : Automatically turns off the light after a certain time has elapsed while
projecting at the specified video level.
6. Press the Esc button.
7. If you selected Dynamic Contrast as the Light Source Control setting, select the Dynamic
Contrast setting, choose one of the following options, and press Enter :
• Select the Response Speed setting and select either Normal (to adjust brightness at the
standard speed) or High Speed (to adjust brightness as soon as the scene changes).
• Select the Black Level setting and select the black level you want to project when the brightness
level of the image signal is zero. (If you select 0% , the light source turns off.)
8. If you selected Lights-Out Control as the Light Source Control setting, select the Lights-Out
Control setting, choose one of the following options, and press Enter :
• Select the Light-Out Signal Level setting and select the brightness level for the current video
signal. If the brightness level exceeds this level, the light source turns off automatically and then
turns back on immediately.
• Select the Lights-Out Timer setting and select the amount of time before the light source
automatically turns off.
9. Press Menu to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting Gamma
You can adjust the gamma to improve differences in halftone brightness that vary depending on the
connected device.
Note: Project a still image to adjust the gamma; you cannot adjust it properly when projecting a movie or
other moving video. Medical images many not reproduce correctly depending on your operating
environment and screen.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Image menu and press Enter .
4. Select Advanced , select the Gamma setting, and press Enter .