Replacing the remote control batteries – Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) User Manual

Page 285

Advertising
background image

285

8.

Repeat these steps to replace the other air filters.

Note:

The air filter cover on the side of the projector is attached to a cord to prevent it from falling.

Parent topic:

Air Filter and Vent Maintenance

Related references

Projector Setup Settings - Extended Menu

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.

Caution:

Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

1.

Remove the battery cover as shown.

Advertising