Epson Pro L30002UNL 30,000-Lumen HDR Pixel-Shift DCI 4K Laser 3LCD Large Venue Projector (White) - Manual (Page 288)

288
• If you are packing the projector to transport it a long distance, remove the lens unit and attach the
cap for the lens cover.
3. To lift or lower the projector, install four commercially available eye bolt screws to the screw thread
holes in each corner of the projector or to the handle. Attach straps or chains to the screws and
make sure the angle of the strap is 60 degrees or more when lifting or lowering the projector.
• If you are attaching the eye bolts to the projector, use four commercially available M8 eye bolts
(shank length 0.4 to 0.6 inches [11 to 16 mm]) and attach them to the four screw holes for eye
bolts.