Power issues, Scanner will not turn on, The scanner has paused or shut down – HP Digital Sender Flow 8500 fn2 Document Capture Workstation User Manual
Page 128
Power issues
●
●
The scanner has paused or shut down
●
Scanner will not turn on
If the scanner will not turn on after pressing the Power button, check the following:
●
The scanner might have been unplugged. Check to see that the power cable has not become disconnected
from the scanner or unplugged from the power source.
●
The power supply might not be working.
–
Check that the Power LED on the control panel is on.
–
If the Power LED is not on, ensure that power is available to the power outlet or surge protector that
the power supply is plugged into.
–
If power is available to the power outlet or surge protector but the Power LED is still not on, the power
supply might be defective. Go to
www.hp.com/go/DSFlow8500fn2
or
www.hp.com/support/
sjflowN9120fn2
for assistance.
The scanner has paused or shut down
If the scanner stops scanning, follow these steps. After each step, start a scan to see if the scanner is working. If
the problem persists, proceed with the next step.
1.
A cable might be loose. Ensure that both the USB cable and power supply are properly connected.
Use the cable that was included with the scanner. Another USB cable might not be compatible with the
scanner.
2.
Ensure that the scanner is receiving power.
a.
Check that the Power LED on the control panel is on.
b.
If the Power LED is not on, ensure that power is available to the power outlet or surge protector that
the power supply is plugged into.
c.
If power is available to the power outlet or surge protector but the Power LED is still not on, unplug
the power cable from the power source, wait 30 seconds, and then plug it back in.
d.
If the issue is not fixed, the power supply might be defective. Go to
www.hp.com/go/DSFlow8500fn2
or
www.hp.com/support/sjflowN9120fn2
for assistance.
3.
Restart your computer.
4.
Windows: On the computer, open Control Panel and use the Add/Remove tool (in Windows 7, and Windows
8, the Programs and Features tool) to uninstall the following applications:
●
HP Scan or HP Scan TWAIN
●
HP ScanJet ISIS Driver
5.
Reinstall the applications by doing one of the following.
118 Chapter 5 Solve problems
ENWW