Edit a quick set, Copy a quick set, Edit a quick set copy a quick set – HP Digital Sender Flow 8500 fn2 Document Capture Workstation User Manual
Page 64
NOTE:
The settings available in Quick Sets Setup vary by the type of Quick Set being added. Refer to the
tables in
Quick Set settings and options on page 55
to see the available settings and options for each
type of Quick Set.
9.
Review the summary of settings, and then click Finish to save the Quick Set, or click Previous to edit the
settings.
Edit a Quick Set
Use the following steps to edit the settings of an existing Quick Set.
1.
Using the top navigation tabs, click General.
2.
In the left navigation pane, click Quick Sets.
3.
In the Quick Sets List area, click the check box next to the appropriate Quick Set, and then click Edit. The
Quick Sets Setup page opens.
NOTE:
Click Cancel on any page of Quick Sets Setup to cancel the current changes, exit Quick Sets Setup,
and return to the Quick Sets page.
4.
If necessary, modify the following settings, and then click Next:
●
Quick Set Name
●
Quick Set Description
●
Quick Set Start Option
5.
Select settings and complete tasks in Quick Sets Setup. Click Next to proceed to the next page of available
options until reaching the Summary page.
NOTE:
The settings available in Quick Sets Setup vary by the type of Quick Set being edited. Refer to the
tables in
Quick Set settings and options on page 55
to see the available settings and options for each
type of Quick Set.
6.
Review the Summary page, and then click Finish to save changes made to the Quick Set.
Copy a Quick Set
1.
Using the top navigation tabs, click General.
2.
In the left navigation pane, click Quick Sets.
3.
In the Quick Sets List area, click the check box next to the appropriate Quick Set, and then click Copy. The
Quick Sets Setup page opens.
NOTE:
Click Cancel on any page of Quick Sets Setup to cancel the current changes, exit Quick Sets Setup,
and return to the Quick Sets page.
4.
If necessary, modify the following settings, and then click Next:
●
Quick Set Name
●
Quick Set Description
●
Quick Set Start Option
54
Chapter 2 Use the scanner
ENWW