HP Digital Sender Flow 8500 fn2 Document Capture Workstation - Manual (Page 92)

Scan using text-enhanced black and white mode
Use this feature to enhance the scanned image when scanning black and white text. To use this feature,
complete the following steps:
1. Open the HP Scan software.
2. Select a scan shortcut.
3. Click More.
4. Select the Image tab, and then select Black/White (1 bit) from the Color Mode drop-down box.
5. Select Threshold for Black/White, select Enhance Content, and then click OK.
Add or remove device
You can use the HP Scan software to add or remove a device on the computer.
1. Open the HP Scan software.
2. Click the Settings icon to open the Device Settings window.
3. Do one of the following:
● To add a device, click the plus + icon, click Connect a new device, and then follow the on screen
instructions.
● To remove a device, select the scanner name from the existing scanner list, and then click the Delete
button.
TIP: You can select multiple scanners to delete them at once.
TIP: You can also use HP Scan Assistant to add a new device. Launch HP Scan Assistant from the computer
desktop, click Tools, click Device Setup & Software, and then select Connect a new device.
Scan by using other scan software
The following third-party applications are also supported by the scanner:
● Readiris Pro: OCR application.
● Cardiris: Business card application.
● Third-party applications that support TWAIN, ISIS, and WIA.
82 Chapter 2 Use the scanner ENWW