HP Digital Sender Flow 8500 fn2 Document Capture Workstation - Manual (Page 30)

Step one: Access the HP Embedded Web Server (EWS)
1. From the Home screen on the product control panel, select the Information icon, and then select the
Network
icon to display the IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
product control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
Step two: Configure the Network Identification settings
NOTE: Configuring email setup on the Networking tab is an advanced process and might require the assistance
of a system administrator.
1. Using the EWS top navigation tabs, click Networking.
NOTE: For configuring the network settings for use with Office 365, Step five: Set up Send to Email to use
Office 365 Outlook (optional) on page 29
2. On the TCP/IP Settings dialog, click the Network Identification tab.
20 Chapter 2 Use the scanner ENWW