HP Digital Sender Flow 8500 fn2 Document Capture Workstation - Manual (Page 49)

6. In the Windows Domain field, type the Windows domain.
NOTE: To find the Windows domain in Windows 7, click Start, click Control Panel, click System.
To find the Windows domain in Windows 8, click Search, enter System in the search box, and
then click System.
The domain is listed under Computer name, domain, and workgroup settings.
NOTE: If a shared folder is set to be accessed by everyone, values for a workgroup name
(default is “Workgroup”), a user name and password must be entered in the corresponding
fields. However, if the folder is within a particular user’s folders and not Public, the user name
and password of that user must be used.
NOTE: An IP address might be necessary instead of a computer name. Many home routers do
not handle computer names well, and there is no Domain Name Server (DNS). In this case, it is
best to set up a static IP address on the shared PC to alleviate the problem of DHCP assigning a
new IP address. On a typical home router, this is done by setting a static IP address that is on the
same subnet, but outside the DHCP address range.
7. Click OK.
● Option two: Save to an FTP Server
NOTE: If an FTP site is outside the firewall, a proxy server must be specified under the network
settings These settings are located in the EWS Networking tab, under the Advanced options.
1. Select Save to an FTP Server.
2. In the FTP Server field, type the FTP server name or IP address.
3. In the Port field, type the port number.
NOTE: In most cases, the default port number does not need to be changed.
ENWW Set up the scanner 39