Teledyne 9110T - Nitrogen Oxides Analyzer - Manual (Page 110)

Model 9110T NOx Analyzer Setup Menu
Teledyne Analytical Instruments 110
5.7. SETUP  COMM: COMMUNICATIONS PORTS
This section introduces the communications setup menu; Section 6 provides the setup instructions and
operation information. Press SETUP>ENTR>MORE>COMM to arrive at the communications menu.
Figure 5-2. SETUP – COMM Menu
5.7.1. ID (MACHINE IDENTIFICATION)
In the SETUP>MORE>COMM menu press ID to display and/or change the Machine ID, which must be
changed to a unique identifier (number) when more than one instrument of the same model is used:
 in an RS-232 multidrop configuration (Sections 3.3.1.8)
 on the same Ethernet LAN (Section 6.5)
 when applying MODBUS protocol (Section 6.7.1)
 when applying Hessen protocol (Section 6.7.2)
The default ID for the Model 9110T is 0200. Press any button(s) in the MACHINE ID menu (Figure 5-3)
until the Machine ID in the Parameter field displays the desired identifier.