Teledyne 9110T - Nitrogen Oxides Analyzer - Manual (Page 29)

Model 9110TH NOx Analyzer Specifications, Approvals, & Compliance
Teledyne Analytical Instruments 29
Note Under the designation, the IZS option cannot be used as the source of
calibration.
2.3. APPROVALS AND CERTIFICATIONS
The TAI Model 9110T analyzer was tested and certified for Safety and Electromagnetic Compatibility
(EMC). This section presents the compliance statements for those requirements and directives.
2.3.1. SAFETY
IEC 61010-1:2001, Safety requirements for electrical equipment for measurement,
control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive
North American:
cNEMKO (Canada): CAN/CSA-C22.2 No. 61010-1-04
NEMKO-CCL (US): UL No. 61010-1 (2nd Edition)
2.3.2. EMC
EN 61326-1 (IEC 61326-1), Class A Emissions/Industrial Immunity
EN 55011 (CISPR 11), Group 1, Class A Emissions
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
2.3.3. OTHER TYPE CERTIFICATIONS
MCERTS: Sira MC 050068/05
For additional certifications, please contact Customer Service:
Toll-free Phone: 800-324-5190
Phone: 858-657-9800
Fax: 858-657-9816
Email: [email protected]