Teledyne 9110T - Nitrogen Oxides Analyzer - Manual (Page 318)

Model 9110T NOx Analyzer Troubleshooting & Service
Teledyne Analytical Instruments 318
QUESTION ANSWER
Do the critical flow orifices of my
analyzer require regular
replacement? No. The o-rings and the sintered filter associated with them require
replacement once a year, but the critical flow orifices do not.
See Section 11 for instructions.
How do I set up and use the
Contact Closures (Control Inputs)
on the Rear Panel of the
analyzer? See Section 3.3.1.6.
12.10. TECHNICAL ASSISTANCE
If this manual and its troubleshooting & service section do not solve your problems, technical assistance
may be obtained from Teledyne’s Customer Service Department at:
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
16830 Chestnut Street
City of Industry, CA 91748
Telephone: (626) 934-1500
Fax: (626) 961-2538
Web: www.teledyne-ai.com
or your local representative.
Before you contact Teledyne Customer Service, fill out the problem report form in Appendix C, which is
also available online for electronic submission at http://www.teledyne-api.com/manuals/.