Teledyne 9110T - Nitrogen Oxides Analyzer User Manual
Page 130
Model 9110T NOx Analyzer
Setup Menu
Teledyne Analytical Instruments
130
<SET
EXIT
DIAG
PREV NEXT
EXIT
Firmware automatically performs a zero point calibration
of the Motherboard’s analog Inputs
Continue pressing
until you reach the
output to be configured
<SET
CAL
EXIT
Firmware automatically performs a span point calibration
of the Motherboard’s analog Inputs
<SET
EXIT
Perform
Troubleshooting or call
Teledyne API’s
Customer Service
From the
5.9.3.11. External Analog Inputs (XIN1…XIN8) Option Configuration
To configure the analyzer’s optional external analog inputs, define for each channel:
gain (number of units represented by 1 volt)
offset
(volts)
engineering units to be represented in volts (each press of the touchscreen button scrolls the list of
alphanumeric characters from A-Z and 0-9)
whether to display the channel in the Test functions