Teledyne 9110T - Nitrogen Oxides Analyzer User Manual
Page 141
Advertising
Model 9110TH NOx Analyzer
Communications Setup and Operation
Teledyne Analytical Instruments
141
From the analyzer’s front panel touchscreen, access the Communications Menu (SETUP>MORE>COMM,
see
2. Figure
5-2).
3. Enter the INET menu shown in Figure 6-4, turning DHCP mode to OFF and editing
the Instrument and Gateway IP addresses and Subnet Mask to the desired settings
(default settings showin in Table 6-3).
Alternatively, from the computer, enter the same information through an application such as
HyperTerminal.
Advertising