Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 113)

Overview of Command Interfaces
Page 4-3
Exit the Command Interface
To exit your current session with the switch from the CLI or the UI mode, type either quit or
logout at the prompt, then press <Enter> . Your session is immediately terminated.
♦ Note ♦
If you forget which command interface mode you are
in, type the
? character. If you are in the UI mode, the
Main Menu will display as shown above. If you are in
the
CLI mode, the switch will show the following
display.
^NO, SHOW, VOICE, SYSTEM, ACCOUNTING, . . .
->