Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 226)

Displaying Current Router Interface Status
Page 9-4
Displaying Current Router Interface Status
To display current interface status information, enter
si
at the system prompt. A screen similar to the following will be displayed.
Interface Summary Status
4 Interfaces
Logical Interface Administrative Operational
Interface Type Status Status
-------------- ---------------------------- ----------------------- ---------------------
1 Slip Enabled Enabled
2 Virtual Router Enabled Active
3 Virtual Router Enabled Active
4 SoftwareLoopback Enabled Enabled
The fields displayed by the si command are described below.
Logical Interface . A number, in sequence, that has been assigned to the virtual router port.
Interface Type . The type of interface, which can be virtual router (the standard interface type),
SLIP , and software loopback.
Administrative Status . Whether the administrator has enabled or disabled the port. The port can
be enabled by the administrator but still be made inactive by the system.
Operational Status . Whether the port is active (operational) or inactive. This status is set by the
system software.