Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 248
Advertising
Configuring CAM Distribution
Page 9-26
A message similar to the following will display:
Slot 3 Configured to learn 256 MACs will round up to 256 MACs
This configuration will take effect only after system reboot
3. The new
CAM
configuration will take effect after you reboot the system. For this reason,
you may want to configure the
CAM
for all modules in this system. Reboot the system and
check the updated
CAM
configurations through the
camstat
command.
Advertising