Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 348)

Trap Tables
Page 13-28
Trap Type moduleChange
Object ID 1.3.6.1.4.1.800.3.1.1.4.0.2
Description A module was either inserted or removed from the chassis. In some
cases, this trap may also be generated when a module is reset.
Bit Position
(Word 1) 1
Hex Value
(Word 1) 2
Trap Text
and
Variable
Descrip-
tions
Module was inserted or removed from chassis (slot 4, subunit 1, type 10)
Slot Number . The slot number on
the front of the chassis where this
module was inserted or removed.
Submodule Type . Indicates the submodule that was
inserted or removed. Typically this value will be 1,
meaning the base module was inserted or removed.
If this value is 2, then HSX module 1 was moved. If
this value is 3, then HSX module 2 was moved.
4 HSM
5 MPM
6
ESM 8-port 10BASE-T
7 ESM 16-port
8 TSM 6-port UTP/STP
9 FSM FDDI module
10 FSM CDDI module
11 ESM 4-port
12 ASM .5 MB multi-mode
13 ESM 12-port 10BASE-T
14 ESM 6-port universal module
15 MPM version II
16 ATM DS-3
17 FSM FDDI single mode
18 ASM .5 MB single mode
19 ASM UTP
20 ESM 8-port fiber
Module Type . Indicates the module type that was inserted
or removed. The following integers are valid values:
21 ESM 12-port Telco
22 TSM fiber
23 ASM 2 MB multi-mode
24 ASM 2 MB single mode
25 WSM
26 WSM BRI
27 HSM2 base slot type
28 PizzaSwitch reserved
29 TSM CD-6
30 ASM 2 MB single mode
33 10Meg Ether Universal
34 ATM E3 (European)
35 Ether 100 FX Sngl Full Dup
36 Ether 100 FX Multi Full Dup
37 Ether 100 TX CU Full Dup
39 PizzaPort (repeater)