Loading a file from the primary mpx, Loading a file from the primary mpx -17 – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 181
Advertising
Loading a File From the Primary MPX
Page 6-17
Loading a File From the Primary MPX
The
mpmget
command loads a file from the primary
MPX
and copies it into the secondary
MPX
. This command is only available and can only be run from a secondary
MPX
. To use this
command, enter
mpmget
, followed by a space, a slash (
/
), the name of the flash directory,
another slash (
/
), and the name of the file you want to transfer.
For example, to load the file
mpm.log
from the
/flash
directory on the primary
MPX
to the
secondary
MPX
you would enter
mpmget /flash/mpm.log
at the system prompt. After a brief moment, the file will be transferred into the secondary
MPX.
The following would then be displayed.
Transferring .. Complete
Advertising