Deleting ports, Deleting ports -37 – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 863
The WAN Port Software Menu
Page 28-37
Deleting Ports
The
wpdelete
command allows you to delete configuration information for a
WSX
port. When
you delete a this information, all WAN configuration parameters for the selected port revert
back to default settings.
To delete a port configuration, enter the following command:
wpdelete slot/port
in which
slot
is the slot number for the
WSX
board and
port
is the port number on the
WSX
board that you want to delete. For example, to delete port 1 on the
WSX
board in slot 2,
enter:
wpdelete 2/1
or
wpd 2/1
This system returns the following prompt to confirm the deletion:
This will delete Slot 2, Port 1. Continue? {(Y)es, (N)o} (N)
Enter a
Y
to confirm the deletion or press
Enter
to cancel the deletion.
Note
The
wpdelete
command requires that you indicate a slot
and port number. For example,
wpdelete
would be an incorrect usage, whereas,
wpdelete 4/2
would be correct.